Requirements check
Machinery and industrial equipment
GPSR/UK GPSR and the US CPSA are omitted because they cover consumer products — but if consumers are reasonably likely to use the machine (e.g. hobby CNC), those regimes re-attach: verify for your product and add the general-consumer rules. Machinery Directive 2006/42/EC applies until 20 January 2027, then Machinery Regulation (EU) 2023/1230 (Annex I lists high-risk machinery needing notified-body assessment). UK: Supply of Machinery (Safety) Regulations 2008 — not a separate id here, verify. Large-scale stationary industrial tools and fixed installations are excluded from RoHS/WEEE — verify whether your equipment qualifies. AI-based safety components in machinery are high-risk AI systems under the EU AI Act — verify (eu-ai-act not auto-applied here). Laser engravers additionally face laser product safety rules (EN 60825; US FDA 21 CFR 1040) — verify. UK PSTI covers consumer connectable products only, so it is not applied. US NRTL listing is mandatory for electrical equipment used in workplaces under OSHA.
United Kingdom (GB)3 instruments
The GB law on electromagnetic compatibility: electrical and electronic equipment must not emit electromagnetic disturbance above levels that stop other equipment working as intended, and must have adequate immunity to disturbance. Most manufacturers self-declare conformity and affix UKCA or CE marking.
Key obligations
- 01Design and manufacture equipment so that the electromagnetic disturbance it generates does not exceed the level above which radio and telecommunications equipment or other equipment cannot operate as intended (Schedule 1 essential requirements).source
- 02Ensure the equipment has a level of immunity to electromagnetic disturbance appropriate to its intended use, allowing it to operate without unacceptable degradation of that use.source
- 03Carry out a conformity assessment (self-declaration via internal production control, or voluntary third-party assessment), draw up a declaration of conformity, and affix the UKCA or CE marking.source
- 04Retain the declaration of conformity and technical documentation for 10 years after the apparatus has been placed on the GB market (applies to manufacturers and importers).source
Restricts ten hazardous substances (including lead, mercury, cadmium and four phthalates) in electrical and electronic equipment placed on the Great Britain market. Manufacturers must self-assess, draw up a declaration of conformity and technical documentation, and affix the UK marking.
Key obligations
- 01EEE placed on the market must not contain the substances listed in Schedule A1 above the maximum concentration value by weight in homogeneous materials: 0.1% for lead, mercury, hexavalent chromium, PBB, PBDE, DEHP, BBP, DBP and DIBP, and 0.01% for cadmium.source
- 02Manufacturers must carry out the internal production control procedure and draw up technical documentation demonstrating compliance.source
- 03Manufacturers must draw up a declaration of conformity stating that the requirements have been met in relation to the EEE.source
- 04The UK marking must be affixed visibly, legibly and indelibly to the EEE (or to its packaging or accompanying documents where that is not possible).source
UKCA is Great Britain's product conformity marking, introduced after EU exit for goods that previously used CE marking. Since 1 October 2024, CE marking is also recognised in Great Britain with no end date for most goods covered by the framework, so businesses can generally use either marking.
Key obligations
- 01Before placing a product in scope of the regime on the GB market, carry out the conformity assessment required by the relevant product regulation and affix the UKCA marking — or the CE marking, which businesses have the flexibility to use in place of UKCA under the continued recognition policy.source
- 02Draw up a UK declaration of conformity and maintain technical documentation (technical files and test reports) demonstrating compliance.source
- 03Apply the UKCA marking in its standard, recognisable form, at least 5mm in height (unless a different minimum dimension is specified in the relevant legislation), and ensure it is easily visible, legible and indelible.source
- 04Until 11pm on 31 December 2027, the UKCA marking may alternatively be placed on a label affixed to the product or on a document accompanying the product (certain sectors such as marine, medical devices, rail and construction products have their own specific rules).source
Documents you will need
Deduplicated across everything above
- Declaration of conformityMust identify the apparatus and include manufacturer (and any authorised representative) details; format/content set out in Schedule 4. Retained for 10 years after placing on the GB market.source
- Technical documentationEvidence of the EMC assessment; same 10-year retention requirement applies to manufacturers and importers.source
- UK Declaration of ConformityMust be drawn up by the manufacturer stating the requirements have been met; a model template is available for download from the GOV.UK RoHS guidance page.source
Track this product to done
Save this result as a live checklist: every requirement, document and deadline above, with status tracking and a document vault. Free for one product.